The overhaul set for G60 G-superchargers includes the following parts:
- 8 sealing strips Sintimid 8000
- 2 auxiliary shaft bearings FAG
- 2 main bearings (inlet/outlet half) FAG
- 1 main bearing (displacer) Torrington
- timing belt Gates 11 mm
- set of housing screws
- grease for needle bearings - filling quantity: 10 grams, syringe
- 5 shaft seals Theibach-Performance
Our shaft seals/Simmerrings are produced with the latest machinery. They withstand the extreme demands of the G-loader. Our shaft seals are in no way inferior to the original and are ideally suited for use in the G-Lader.
- Material and dimensions like the original WDRs from Goetze
- specially improved for G-Lader
- twisted
- pressure stabilised and stepped
Our shaft seal has been successfully on the market since 2008
In this set of parts are the highest quality parts! Only in this way can you operate your G-charger in a stable and reliable manner over the long term and avoid G-charger damage.
Original part for G40 and G60 loader
Grease for coating the displacer, video instructions
Oil feed line and attachment material for G40 and G60 loaders
incl. banjoes
special Loctite for the fixation of radial shaft seals in the G-charger
for sealing housings and oil pans
Grease for coating the displacer, video instructions
315ccm (at 3bar) injectors for VW Golf G60 with large HVAC
incl. banjoes
6 screws for fixing the G60 loader
Original Sintimid sealing strips in beige for G40 and G60 G-chargers, video instructions
Sufficient for filling the small needle bearing, 1ml