Using the latest machinery and production techniques, we have developed a shaft seal that meets the requirements of the G-loader. Our WDR is in no way inferior to the original from Goetze. The shaft seals are suitable for G40 and G60 loaders and of course also for our G65 loaders.
- Material and dimensions as original - Simmerring from Goetze
- specially improved for G loaders
- twisted
- pressure stabilised and stepped
Our shaft sealing ring has been successfully on the market since 2008! So it is probably the best alternative to the original Götze - WDRs, which have unfortunately become very expensive.
In addition, the original sealing rings still on the market have now aged over 10 years.
for G40 and G60 G-Lader to fix the WDRs in the displacer for extremely small loader wheels
single shaft sealing ring for the inlet half inside for G40 and G60 loaders, dimensions: 30 - 52 -7/8
single shaft seal ring for the displacer of G40 and G60 loaders, dimensions: 30 - 42 - 5.5/6
single shaft seal for outlet half of G40 and G60 loaders, dimension: 20 - 35 - 7
single oil seal for the inlet half outside - behind the loading wheel of G40 and G60 loaders, dimensions: 30 - 45 - 6
special Loctite for the fixation of radial shaft seals in the G-charger
special Loctite for the fixation of radial shaft seals in the G-charger
Timing belt for the G-Lader in 11,5mm for G40 and G60
Oil feed line and attachment material for G40 and G60 loaders
Sintimid sealing strips and timing belts for G40 and G60 loaders
Sealing plate for cast sheet
for large LLK
for all G60