Using the latest machinery and production techniques, we have developed a shaft seal that meets the requirements of the G-loader. Our WDR is in no way inferior to the original from Goetze. The shaft seals are suitable for G40 and G60 loaders and of course also for our G65 loaders.
- Material and dimensions as original - Simmerring from Goetze
- specially improved for G loaders
- twisted
- pressure stabilised and stepped
Our shaft sealing ring has been successfully on the market since 2008! So it is probably the best alternative to the original Götze - WDRs, which have unfortunately become very expensive.
In addition, the original sealing rings still on the market have now aged over 10 years.
for G40 and G60 G-Lader to fix the WDRs in the displacer for extremely small loader wheels
single shaft sealing ring for the inlet half inside for G40 and G60 loaders, dimensions: 30 - 52 -7/8
single shaft seal ring for the displacer of G40 and G60 loaders, dimensions: 30 - 42 - 5.5/6
single shaft seal for outlet half of G40 and G60 loaders, dimension: 20 - 35 - 7
single oil seal for the inlet half outside - behind the loading wheel of G40 and G60 loaders, dimensions: 30 - 45 - 6
special Loctite for the fixation of radial shaft seals in the G-charger
special Loctite for the fixation of radial shaft seals in the G-charger
Sufficient for filling the small needle bearing, 1ml
Housing screws for the G60 G loader
Sintimid sealing strips and timing belts for G40 and G60 loaders
10.9 Screw for fixing the loading wheel on G40 and G60 G loaders, galvanised
Original Sintimid sealing strips in beige for G40 and G60 G-chargers, video instructions
Timing belt for the G-Lader in 11,5mm for G40 and G60