The upper connecting rod bearing shells are often a weak point. This can be remedied with the reinforced "SPUTTER" bearing shells. These are the well known and above all proven RS2 bearing shells.
4 sputter bearing shells are supplied for the top and 4 bearing shells for the bottom in normal design. Under no circumstances should sputter bearing shells be used on the top and bottom.
technical details:
for shaft diameter from [mm] 47.758
to shaft diameter [mm] 47.778
for housing diameter from [mm] 50.600
to housing diameter [mm] 50.612
Thickness/Thickness [mm] 1.395
Width [mm] 19.000
for bearing clearance from [mm] 0.032
to bearing clearance [mm] 0.089
complete kit for original connecting rods
complete set - 8 pieces
Rubber version
Grease for coating the displacer, video instructions
Oil feed line and attachment material for G40 and G60 loaders
for the insulation of fan manifolds / exhaust systems, 10m long, 50mm wide
Compression 9,0:1 - set of special pistons for 16VG60 / 16V Turbo based on the 9a engine
Metal cylinder head gasket for VW 1.8ltr and 2.0 ltr 16V engines - for max. 83mm bore
complete maintenance kit for the G60 G-Lader - Sintimid, FAG, Theibach-Performance