Deutschen Sprache wechseln?- Description
- More images
- Recommendation
- Customers also bought
New reinforced release lever for the 02A and 02J transmissions which are installed in the G60, VR6, 2L 16V, GTI, TDI, Corrado, Golf 2, 3 and Passat.
When using reinforced pressure plates the original release lever reaches the limits of its load capacity and can bend or in the worst case even break. By welding the reinforcement plates to the weak points the stability is significantly increased. Sport clutches can therefore be installed without any problems.
The reinforcing plates are welded into new release levers using the TIG process. The complete release lever is then galvanised.
This product is compatible with:
reinforced version - 228 mm, for all G60 and VR6, as well as 2.0 GTI and 2.0 16V
torsion sprung disc with organic coating - 228 mm, for all G60, VR6, 2.0 GTI 8V and 2.0 16V
Clutch disc + pressure plate, torsion spring sintered disc - 228 mm, for all G60, VR6, 2.0 GTI 8V and 2.0 16V
torsion sprung disc - organic pads - 228 mm for all G60 and VR6, as well as 2.0 GTI and 2.0 16V
torsion sprung sinter disc - 228 mm, for all G60 and VR6, as well as 2.0 GTI and 2.0 16V
for all 02A and 02J gearboxes, MKB: PG G60 incl. Syncro / 1H / 2E / ABF / AFN / 1Z / ALE / AHU
Customers who bought this product also bought the following products:
210 mm wide
suitable for 228mm clutches like in 1.8 G60 and 16V, 2.0 8V, 2.0 16V and VR6
complete hose set for G60 Golf, Rallye and Corrado (MKB PG) - in black
reinforced version - 228 mm, for all G60 and VR6, as well as 2.0 GTI and 2.0 16V
torsion sprung disc - organic pads - 228 mm for all G60 and VR6, as well as 2.0 GTI and 2.0 16V
for all 02A and 02J gearboxes, MKB: PG G60 incl. Syncro / 1H / 2E / ABF / AFN / 1Z / ALE / AHU
We are a member of the
E-mail address:
The newsletter can be canceled here or in your Account at any time.